Audio 2000 AWM6032UM UHF Dual-Channel Wireless Microphone Systems w/ 2 Lavaliere Mic

Lavaliere (lapel) wireless microphone system - AWM6032UM (AWR6032U + 2 X AWX6030M)

Engineered For Dependable UHF Systems

As all the other Audio2000'S® wireless products, the AWM6032U system has been engineered to be dependable UHF system with a wide audio frequency range, high S/N ratio, and outstanding performance equal to that of any professional wireless systems costing much more. This is achieved through strict component selection and high quality circuit design. A delicately designed silence circuit eliminates static noise when the transmitters are either turned off or out of transmission range. An auto mute circuit is incorporated in these systems to effectively eliminate the popping noise when the switch is turned on or off.

System Designed For Accessibility

The AWM6032U system has been designed and manufactured to be dependable, problem free, versatile and easy to use. The AWM6032U system is intended to be readily accessible to everyone with exceptional performance at a preferred and affordable price.


APPLICATIONS

Musician; disc jockey (DJ); karaoke jockey (KJ); church; school; conference room; karaoke; home entertainment

AWR6031DU RECEIVER

FEATURES

• UHF Band Frequency (800MHz)
• Two Independent XLR Balanced Outputs
• One 1/4" Unbalanced Audio Output
• RF Input with Built-in RF Preamplifier to Improve S/N Ratio, Sensitivity and Dynamic Range
• Low Noise Mixer Circuitry for Reducing interference
• Two Squelch Control Knobs (One for Each Channel) at the Rear Panel
• 12V-18V DC Power Supply

SPECIFICATIONS

• Carrier Frequency Range: UHF Band
• Frequency Stability: ± 0.005%
• Receiving Sensitivity: -105 dBm
• S/N Ratio: 80dB
• T.H.D.: < 1%
• Audio Output: 1/4" and XLR (0 - 300mV @ 600 Ohms)
• Dimensions (W X H X D): 8.5" X 1.6" X 5.4" (215 X 40 X 138 mm)

AWX6030, AWX6030M, AWX6030H & AWX6030G TRANSMITTERS

FEATURES

• UHF Band Frequency (800MHz)
• High Sensitivity Cardioid Microphone Capsule
• Audio Level Adjustment Knob for the AWX6030M, AWX6030H, and AWX6030G
• Noise Reduction Mechanism for Eliminating Handling Noise and Switch Shock Noise
• Low Battery LED Indicator

SPECIFICATIONS

TRANSMITTER

• Carrier Frequency Range: UHF Band (800MHz)
• Frequency Stability: ± 0.005%
• Modulation: Frequency Modulation (FM)
• Modulation Depth: 40KHz
• Output Power: 30mW, Max
• Spurious Emission: > 55 dB
• Battery: 9V Battery
• Current Consumption: < 40 mA
• Dimensions (W X H X D) : Handheld: 9.3" X 2.0" X 2.0"
                                        Belt-Pack: 2.6" X 4.1" X 1.0"

SYSTEM

• Carrier Frequency Range: UHF Band
• Frequency Stability: +/- 0.005%
• Audio Frequency Response: 80 - 15,000Hz
• Image and Spurious Rejection: 50dB Minimum
• S/N Ratio: > 80dB
• Max. SPL: 110dB
• T.H.D.: < 1%
• Service Area: 100 ft (30 M)
• Operation Temperature:14 F - 122 F (-10 C -- +50 C)

SYSTEM OPERATION

(II) LAPEL (LAVALIERE) MICROPHONE SYSTEM

1. Set the antennas at an angle 45 from the floor and 90 away from each other to achieve the best RF reception.
2. Connect the AWR6032U receiver DC input to an AC power source via the supplied AC/DC adaptor.
3. Connect the AWR6032U receiver audio output to the microphone input of a mixer via the supplied audio cable or any other appropriate cable. (Note: There are two outputs: one unbalanced output and one balanced output.)
4. Place one 9V battery into the battery housing of the AWX6030M transmitter with the battery polarity oriented as indicated. Connect the supplied lapel (lavaliere) microphone to the AWX6030M transmitter.
5. Turn on the power of the AWR6032U receiver. The Power On LED light will be turned on.
6. On the AWX6030M, the On/Off switch has three positions: "ON", "STDBY" and "OFF". When the On/Off switch is turned to the "STDBY" or directly to the "ON" position, the low battery LED indicator will blink once and then stay off. If the low battery LED indicator stays on, the 9V battery needs to be replaced. When the On/Off switch is set to the "STDBY" or "ON" position, the corresponding channel 1 RF LED light or channel 2 RF LED light on the AWR6032U receiver will be turned on. The corresponding channel 1 AF LED light or channel 2 AF LED light will be on whenever the AWX6030M transmitter receives any sound while the On/Off switch is set at the "ON" position. The audio level adjustment knob is preset at midpoint. If you need to increase the audio level, use a screwdriver to turn the audio level adjustment knob clockwise. Turn the audio level adjustment knob counter-clockwise to reduce the audio level.
7. Adjust the volume control knob on the AWR6032U receiver to have an optimal sound quality.